ITS Tactical shock cord inserts part 2 .

Following on from loading up the inserts , I have started to try and figure out where to place them on my kit in both horizontal and vertical configurations . .

As all of it is Kifaru gear its kinda easy to get carried away like playing with Lego seen here on my Claymore and E&E packs and I have not  even touched the kifaru Express main pack yet .

So the basic plan is to cut some sticky backed Mil-spec loop velcro tape and position it either internally or externally to maximize carry potential .

Only the backing velcro will be permanently fixed so it allows me to set up the kit and change it as required .

If anyone has opinions on where they think the inserts should be placed on the kit , please do advise !

Full specs from ITS Tactical here http://www.itstactical.com/store/nylongear/its-shock-cord-insert/

  1. ktulhu777 reblogged this from everydaygun
  2. silvet reblogged this from thenewartemis
  3. shinjiikari-01 reblogged this from ru-titley-knives
  4. flyinglow1974 reblogged this from thenewartemis
  5. onarecce reblogged this from seven6twobythirty9
  6. militaryboobsandsmoking reblogged this from youareclearedhot-over
  7. shutt3rflyy reblogged this from 45-9mm-5-56mm
  8. needynerd reblogged this from danthemedicman
  9. shenan1ganz reblogged this from danthemedicman
  10. youareclearedhot-over reblogged this from danthemedicman
  11. danthemedicman reblogged this from mrmac411
  12. mrmac411 reblogged this from 1trustfewfearnone
  13. 1trustfewfearnone reblogged this from 45-9mm-5-56mm
  14. ancap-jack reblogged this from 45-9mm-5-56mm
  15. gangstamcswag reblogged this from 45-9mm-5-56mm
  16. trigun0333 reblogged this from itstactical