So here’s that hawk mask that I recently finished off , its a basic friction fit sheath .

Made from 4.5 mm wet formed veg tan leather which was then distressed on the workshop floor .

 Old copper was then shaped and hammered into place , then drilled and  riveted with copper saddlery rivets before being aged with brass black .

 The leather was then double dyed dark brown and then light for an aged effect before being rubbed back with wire wool for a scuffed effect.

Custom knives , sheaths and gear from rtknives@hotmail.com

  1. kattenschedel reblogged this from summerstag
  2. breezingby reblogged this from lorenzens-soil
  3. 89bart reblogged this from lorenzens-soil
  4. lorenzens-soil reblogged this from mydarknessfalls
  5. its-jackndianne reblogged this from mydarknessfalls
  6. mydarknessfalls reblogged this from mornatur
  7. brunhildthevalkyrie reblogged this from omismorktaake
  8. omismorktaake reblogged this from pagan-pride
  9. donnerkeil reblogged this from pagan-pride
  10. pagan-pride reblogged this from pqsthoughts
  11. whitewolfboy reblogged this from pqsthoughts
  12. pqsthoughts reblogged this from daughterofmystics
  13. dragonjimm reblogged this from ru-titley-knives
  14. emiln95 reblogged this from thrasherviking
  15. my-heart-runs reblogged this from ru-titley-knives
  16. thrasherviking reblogged this from emiln95
  17. clockworkbeard reblogged this from wanderingheathen
  18. mornatur reblogged this from yggdrasill--